BFGKW - 745756 ENAMEL ALKYD SG BAKING WHT 27875

  • MSDS: BFGKW
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: 745756 ENAMEL ALKYD SG BAKING WHT 27875
  • National Stock Number: 8010-00-584-3080
Product Identification

Product ID:745756 ENAMEL ALKYD SG BAKING WHT 27875
MSDS Date:01/01/1985
FSC:8010
NIIN:00-584-3080
MSDS Number: BFGKW

Responsible Party
PRATT & LAMBERT

Emergency Phone: 316-733-1361

Cage: PRATT

Contractor
PRATT AND LAMBERT INC
2153 CLEVELAND, OH 44101-1027 US

Telephone: 216-566-2902

Cage: 61196

Ingredients

VM+P NAPHTHA

RTECS: ZB1600000

Fraction By Weight: 15%

ACGIH TLV: 200 PPM


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 7.5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


N-BUTYL ALCOHOL

Fraction By Weight: <5%

ACGIH TLV: 50 PPM


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CELLOSOLVE ACETATE

RTECS: FJ4375000

Fraction By Weight: <5%

ACGIH TLV: 100 PPM

Hazards

Effects of Overexposure:INHALATION-ANESTHETIC,IRRITATION OF RESPIRATORY
TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION.

First Aid

First Aid:CONTACT-FLUSH SKIN AND EYES WITH WATER WHILE REMOVING
CONTAMINATED CLOTHING. INHALATION-REMOVE TO FRESH AIR. CALL
PHYSICIAN IF SYMPTOMS PERSIST.

Fire Fighting

Flash Point:50F, 10C TCC
Extinguishing Media:NFPA CLASS B EXTINGUISHER; POLYMER FOAM FOR LARGE
FIRES
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS SHOULD BE
AVAILABLE
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE AVOVE 120F STORE LARGE
QUANTITIES IN BUILDING DESIGNED TO COMPLY WITH OSHA 1910.106
Other Precautions:GROUND CONTAINERS WHEN POURING AVOID FREE FALL OF
LIQUID IN XS OF FEW INCHES. DO NOT FLAME CUT, BRAZE OR WELD COATED
MATERIAL WITHOUT BUR OF MINES APPROVED RESPIRATOR OR APPROPIATE
VENTILATION

Exposure Controls

Respiratory Protection:OPEN AREA BUR MINES MECH RESPIRATOR-CLOSED BUR
MINES CHEM/MECH FILTE
Ventilation:GENERAL DILUTION OF LOCAL EXHAUST TO KEEP TLV BELOW LIMIT.
Protective Gloves:REG IF LONG CON
Eye Protection:TO PROTCT IS SPLASHING
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:223-290F
Vapor Density:>AIR
Evaporation Rate & Reference:Percent Volatiles by Volume:59

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS-INCINERATE IN APPROVED FACILITY-DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.